Which Garage Openers Work with GuestsKey?
GuestsKey’s garage controller is in a founding-host beta. Which controller your garage needs depends on your opener, and the quickest clue is the colour of its learn button. A photo of the button and the model label confirms it.
Find the learn button
- Stand under the opener: the motor unit mounted on the garage ceiling.
- Look on the back or side of the unit, usually next to or behind the light cover. You may need to remove the cover.
- Find a small square or round button. It is often labelled “Learn”, sometimes next to a small LED.
If you can’t find one, check the wall control by the door instead. A plain push-button wall control (a single button with no screen) counts as a push-button opener.
What each colour means
| Learn button | Typical openers | Controller |
|---|---|---|
| Red, orange or purple | Genie, Linear, Overhead Door, older LiftMaster and Chamberlain | GK Garage Contact |
| Plain push-button wall control | Most openers with a simple single-button wall control | GK Garage Contact |
| Yellow | LiftMaster, Chamberlain and Craftsman with Security+ 2.0 | GK Garage Secure. It also reports whether the door is open or closed and any obstruction |
| White | Newest LiftMaster and Chamberlain (Security+ 3.0) | Not supported yet |
| Slide or swing gate | Gate operator control boards | GK Gate, coming soon |
If your learn button is white
Openers with a white learn button use Security+ 3.0, which GuestsKey doesn’t support yet. You can still sign up for the beta: choose White for the learn button, and we’ll tell you when your opener is supported.
If you’re not sure
Choose Not sure in the beta form. After you sign up, reply to the confirmation email with:
- a photo of the learn button, and
- a photo of the opener’s model label (usually on the side or back of the motor unit).
We’ll confirm the right controller from the photos.
Before installing
- Wi-Fi: the controller joins the property’s Wi-Fi directly, with no hub. Check the signal at the opener in the garage, not inside the house.
- Existing remotes: the wall button and existing remotes keep working.
- Closing: during the beta the guest link opens the garage only. Closing happens on site.